Slide
A BUSINESS UNIT INSIDE THE ORGANIZATION OF SIC, THIS
DEPARTMENT IS IN CHARGE OF ALL THE ACTIVITIES AS EPC CONTRACTOR AS FOLLOWS

A BUSINESS UNIT INSIDE THE ORGANIZATION OF SIC, THIS DEPARTMENT IS IN CHARGE OF ALL THE ACTIVITIES AS EPC CONTRACTOR AS FOLLOWS

ENGINEERING

• Process design, conceptual engineering and equipment sizing;
• Testing campaign in laboratory and pilot plant;
• Detailed design and shop drawings engineering.
• Conducting NDT (VT, PT) of the fabricated items.
• Maintenance of the equipments and machineries.

PROCUREMENT

Sourcing and procurement including logistics supports for all equipment, machinery and materials required.

BUSINESS LINE OF SIC-EPC

Fabrication and erection of “Standard” and/or “High Technology” light and heavy structural steel work, flat or round steel plate works for the industrial sectors with the capability of manufacturing carbon, alloy and stainless grade steel materials.

CONSTRUCTION

• Construction, installation works of steel fabricated components and structures for buildings & industrial works, equipment, machinery.
• Piping construction and erection work.
• Electrical & instrumentation installation work.
• Testing, start-up, commissioning and test runs.
• Project and construction management, supervision & coordination.

SIC-EPC FACILITIES ARE LOCATED AT MRP FACILITIES – CHONBURI PROVINCE SOME 25 KM
TO LAEM CHABANG DEEP SEAPORT OF THAILAND. THE PREMISES AT MRP COMPRISES OF THE FOLLOWING
SIC-EPC FACILITIES ARE LOCATED AT MRP FACILITIES – CHONBURI PROVINCE SOME 25 KM TO LAEM CHABANG DEEP SEAPORT OF THAILAND. THE PREMISES AT MRP COMPRISES OF THE FOLLOWING
  • null
    A fabrication area with a covered area of 10,000 sqm (four halls of 120 x 20 x 12 m, each provided with 4 overhead cranes of 20 tons capacity).
  • null
    A blasting and painting building of 1,800 sqm provided with a closed grit blasting chamber and two cranes of 20 tons capacity.
  • null
    A heavy machining shop of 10,800 sqm.
  • null
    A light machining shop of 2,025 sqm.
ALL THE TASKS AND WORKS RELATED TO THE FABRICATION AND ERECTION WORKS ARE PERFORMED BY SIC AS PER THE FOLLOWING SCHEME

• Project Management & Coordination
• Engineering, process, conceptual, detailed and shop drawings
• Procurement of raw material for fabrication
• Fabrication work including preparation works, assembling,
welding, surface preparation and painting
• Quality assurance and quality control procedures
• Testing requirements (welding, painting, trial…)
• Packing and delivery to the port or to any job site
• Site work including unloading, storage, erection & installation work
• Site Management, coordination & supervision.

0

COMPLETED PROJECTS

0

YEARS OF EXPERIENCE

0

SATISFIED CLIENTS

EPC PROJECTS

Reference List Document revised
February 2015 – available on request

TLT – TURBO GMBH
AXIAL FAN FOR POWER PLANT

TLT-TURBO GMBH – FRESH AIR FAN
POWER PLANT KARLSRUHE RDK8 – GERMANY
TLT-TURBO GMBH – HOT GAS FAN
MEDUPI POWER PLANT – SOUTH AFRICA
TLT-TURBO GMBH – HOT GAS FAN
MEDUPI POWER PLANT – SOUTH AFRICA
TLT-TURBO GMBH – HOT AIR FAN ASSEMBLY
GKM- GERMANY
MEENAKSHI IMPELLERS/SIEMENS INDIA
DIFFUSER
SUCTION BOX
TRANSITION PIECE
MEENAKSHI IMPELLERS/SIEMENS INDIA

GOWA GMBH
SOUND ATTENUATION SYSTEM

GOWA GMBH – FRESH AIR FILTER & DUCTING
WORKS JANNAGAR PROJECT INDIA
GOWA GMBH – INSULATION WORK OF BOOSTER
FANS MONROE POWER PLANT – USA
GOWA GMBH – ABSORPTION SPLITTERS
GALVANIZED STEEL TYPICAL VARIOUS SPLITTERS

EPC PROJECTS

SIC-EPC is also verified and recognized as welding workshop in the product range of structural steel components based on requirements of the standard DIN EN ISO 3834-2. The department also has qualified NDT personnel for VT (Visual Testing) and PT ( Dye Penetrant testing) of the welding work according to EN 473 to support and maintain the quality of the work.

YOUR INDUSTRIAL GROWTH PARTNER